|
Registration Reminder - Please read first!
We also take Visa
and Mastercard. ABN 57 070 431 935 |
Yes, you have reached the download area! At last!
[ UltraNav 3.1 Full Install | Update V3.0 to V3.11 ]
|
UltraNav works only for AUSTRALIAN flight planning! |
|
|
After READING INSTRUCTIONS
|
UltraNav
Shareware Full install - Instructions: These instructions show the
procedure when downloading using Windows Internet Explorer. Other
browsers may have different dialogues. First, click on the link on the left.
You should get the following dialog (check the program name and file
size is correct. If not, press
Cancel - security may have been compromised. Press "Run", and the program will be
downloaded - this will take a while. Eventually you will see: Press "Run", and you will get the following
message: Pressing OK will result in the following: Note: The program will have restricted print and import export functions until you install the Towns/Features database (available with registration).
|
| NOTE!!!! | We suggest you read through the
Usage Tips below before using the program!!!! It will save us some time on the phone!!!! Alternatively, why not register and get the manual on disk? |
Usage tips
Please note, of course that full instructions are available in
the manual if you register, and that without it, your use of UltraNav
will be a voyage of discovery!
These are the steps you need to go through after installation:
- Run "UltraNav Setup" from the created program group.
- Select "Pilots" and enter your details - and select your entry as the default pilot.
- Select "Aircraft Types" and check if your type is available in the drop down list. If so, make sure the performance information is correct and if not, modify it. If it isn't there, add it.
- Select "Aircraft" and enter the registration of your aircraft, and select it from the list of types (it should now be present), and select the equipment installed.
- Select "Preferences" and select your aircraft from the drop-down list as the default for the plans
- Close the setup program
- Start UltraNav
- The program starts and loads the ERSA database. You can immediately search for and add waypoints from the ERSA by typing the identifier or searching on the name. So add all the waypoints that you need from ERSA...
- Press "cancel" and you will see the basic plan... laid out as a spreadsheet-like grid.
- You can interact with any leg in several different ways, depending on preference.
Menus and Mouses!
By clicking once with the left mouse
button, you select a waypoint. The program will them make visible the
toolbar options for the leg to that waypoint. Instead of using the
toolbar, you can also use the RIGHT mouse button to bring up a menu of
available options for the leg. Or, you can Double-click on the item you
want to change (eg, wind speed) to bring up the data entry panel for
that item... the choice is yours!
How to create a temporary folder in Win95 to 2000
Follow these instructions carefully
- Double-click on the "My Computer" icon on your desktop.
- Double click on the disk drive you want to put the folder in.
- This should show you a window with the contents of the drive. On this windows menu bar, select File, then New, then Folder. (If there is no menu bar, click the Right Mouse button with the mouse cursor over the window, and select New, then Folder to get the same result).
- A folder named "New Folder" will appear in the list of contents with the name highlighted. Overtype the words "New Folder" with "UNTEMP"
- Close this window.